Showing 1–9 of 31 results

150 RPM BO Motor – L Shape

49.00 (Incl. GST) [Excl. GST: 41.53]
  1. Low density: lightweight, low inertia.
  2. Capability to absorb shock and vibration as a result of elastic compliance.
  3. Ability to operate with minimum or no lubrication, due to inherent lubricity.
  4. The relatively low coefficient of friction.
  5. Operating Voltage(VDC): 3~12
  6. Shaft Length (mm): 8.5
  7. Shaft Diameter (mm): 5.5 (Double D-type)
  8. No Load Current: 40-180mA.
  9. Rated Speed(After Reduction): 150 RPM
  10. Rated Torque: 0.8 Kgcm

150 RPM BO Motor – Straight

49.00 (Incl. GST) [Excl. GST: 41.53]
150 RPM BO Motor which gives good torque and rpm at lower voltages. This motor can run at approximately 340 rpm when driven by a Dual Li-Ion cell battery.

37 in 1 Sensors Kit compatible with Arduino

1,299.00 (Incl. GST) [Excl. GST: 1,299.00]
  •  37 in 1 sensor kit compatible with Arduino Raspberry and other microcontrollers
  • Skill level: beginners to advance level
  • The package includes: 37 individual sensors in the retail box

65mm Robot Wheel for BO Motors (Yellow), 2 Pcs Pack

60.00 (Incl. GST) [Excl. GST: 60.00]
  1. A tire with sponge liner for more strength
  2. With upgraded tire tread for greater friction
  3. New design wheel for better combination with the motor
  4. Diameter: 65 mm
  5. Width : 28 mm
  6. The material of Wheel: High-strength plastic
  7. The material of Tyre: Rubber
  8. Color: Yellow

Arduino Uno R3 Starter Kit

1,599.00 (Incl. GST) [Excl. GST: 1,355.08]
  1. Great for Starting with Arduino Programming
  2. A variety of components are included in this pack to try out different projects.
  3. The kit comes with quality components assured by Robokidz.co.in
  4. All-in-one kit, a great starter kit for learning to code.
  5. Microcontroller ATmega328 – Interface CH340G

BLACK+DECKER CD121K50 12V 10mm Ni-Cd Cordless Drill/Driver with Keyless Chuck and 50 Accessories Kitbox

3,349.00 (Incl. GST) [Excl. GST: 2,838.14]
  • Package Contents: 12V Drill/Driver, 1.3 Ah Ni-Cd battery pack, charger, 1 double ended screwdriver bit, 12 titanium coated high speed drill bits, 4 wood drill bits, 4 wood spade bits, 3 50mm screwdriver bits, 20 25mm screwdriver bits, 4 nut drivers, 2 screw finders, 1 magnetic bit holder and 1 kit box and warranty card
  • The 17 positon torque control allows comfortable drilling and screw driving into wood or steel with different sizes of screws and bits. Drilling Capacity : 10 mm
  • Spring Loaded Slide Pack Battery System - For quick and easy battery change and a more secure fit ; Metal Drilling ; Battery Voltage: 12V
  • Variable speed / reverse switch to control drilling and driving
  • Mid handle design optimizes balance andreduces hand fatigure
  • Warranty: 6 months comprehensive on the product

Bosch GSB451 450W 10mm Professional Impact Drill (Blue)

2,100.00 (Incl. GST) [Excl. GST: 2,100.00]
  • Material: Plastic and Metal, Color: Blue
  • Package Contents: 1-Piece Drill and 5-Pieces Masonry Drill Bits
  • No warranty
  • Powerful 450 W motor and Drilling in concrete: 10mm
  • Speed: 2600 RPM and Impact Rate 25700 bpm
  • Included - I each of impact drill, 5 masonry drill bit set, and chuck key

Creality 3D Ender-3 3D Printer DIY Easy-Assemble 220 x 220 x 250mm Printing Size with Resume Printing Support PLA, ABS, TPU

17,999.00 (Incl. GST) [Excl. GST: 15,253.39]
  • DIY ASSEMBLY: Enjoy the satisfaction of completing the assembly of 3d printer kit and better understanding the principles of the inside of machine. Also a great way for parents and children to spend quality time together! First choice for Christmas!
  • SUPERIOR PRINTING SURFACE: Our "C-MAG" magnetic mat adheres better to the platform than traditional texture glue plate or paper surface, making it easier to remove the models. The maximum printing size is 220 x 220 x 250 mm, meeting your more printing needs!
  • NEW Y-AXIS DESIGN: Designed with a sturdier 40x40mm Y-axis, which not only improves excellent stability and printing quality but also helps to reduce the noise level. What's more, it can resume printing after suffering unexpected power outages!
  • MORE FEATURES: Easy manual leveling set, upgraded Mk-10 extruder, quick heating to reach 110℃ in needs 5 minutes, Meanwell certified power supply & more, compatible with PLA TPU 1.75mm filament. Modular design, faster assembly!
  • 100% SATISFACTION: This 3d printer is a semi-assembled kit, a best creative gift for kids, and entertaining STEM educational experience in engineering and electronics. Each printer was tested before shipping. If you have any questions, feel free to contact us.
-13%
Black
Golden
Pink
Purple
Red

Creality PLA 1.75mm 3D Printer Filament

1,299.00
Features: High purity, no plug. High precision, tolerance control within 0.02mm, printing effect is more remarkable. Good tensile strength, ductility, fluidity, high toughness, and low weight. The improved wire coil is more humanized. Suitable for 99% FDM printer in 3D Market. PLA material, environmental protection, high gloss, printing is not easy to crack, the product is not easy to get up, will not emit odor. Diameter: 1.75mm Weight: 1kg/Spool, Diameter tolerance is within ±0.02 Recommended Extrusion/Nozzle Printing Temperature 190 - 220℃; Recommended Build Platform Temperature 0 – 50℃; Can Be Stored up to one year Superb layer bonding, Vacuumed Sealed With Desiccant